Displaying And Maintaining Cluster Configuration; Cluster Configuration Example - 3Com 4210 PWR Configuration Manual

Displaying and
Maintaining Cluster
Configuration
Cluster Configuration
Example
Basic Cluster
Configuration Example
Table 257 Configure the cluster device blacklist
Operation
Delete the specified MAC
address from the cluster
blacklist
Delete a device from the
cluster add this device to the
cluster blacklist
Displays the information
about the devices in the
cluster blacklist
After the above configuration, you can execute the display commands in any
view to display the configuration and running status of cluster, so as to verify your
configuration.
Table 258 Display and maintain cluster configuration
Operation
Display all NDP configuration
and running information
(including the interval to send
NDP packets, the holdtime,
and all neighbors discovered)
Display NDP configuration
and running information on
specified ports (including the
neighbors discovered by NDP
on the ports)
Display global NTDP
information
Display device information
collected by NTDP
Display status and statistics
information about the cluster
Display information about the
candidate devices of the
cluster
Display information about the
member devices of the cluster
Clear the statistics on NDP
ports
Network requirements
Three switches compose a cluster, where:
The Switch 4210 serves as the management device.
■
The rest are member devices.
■

Displaying and Maintaining Cluster Configuration

Command
black-list delete-mac
mac-address
delete-member member-id [
to-black-list ]
display cluster black-list
Command
display ndp
display ndp interface
port-list
display ntdp
display ntdp device-list [
verbose ]
display cluster
display cluster candidates [
mac-address H-H-H |
verbose ]
display cluster members [
member-number | verbose ]
reset ndp statistics [
interface port-list ]
333
Description
Optional
Optional
Optional
This command can be
executed in any view.
Description
You can execute the display
command in any view.
You can execute the reset
command in user view.