3Com 7757 Configuration Manual page 111

Voice VLAN
Configuration Example
(Manual Mode)
<SW7750> system-view
[SW7750] vlan 2
# Configure Ethernet2/0/1 port to be a Trunk port, with VLAN 6 as the default
VLAN, and permit packets of VLAN 6 to pass through the port.
[SW7750-vlan2] quit
[SW7750] interface Ethernet 2/0/1
[SW7750-Ethernet2/0/1] port link-type trunk
[SW7750-Ethernet2/0/1] port trunk pvid vlan 6
[SW7750-Ethernet2/0/1] port trunk permit vlan 6
# Enable the voice VLAN feature on Ethernet 2/0/1, set the voice VLAN operation
mode to auto, and bind VLAN 2 to Ethernet 2/0/1 as a voice VLAN.
[SW7750-Ethernet2/0/1] voice vlan enable
[SW7750-Ethernet2/0/1] voice vlan mode auto
[SW7750-Ethernet2/0/1] voice vlan 2
Network requirements
Configure Ethernet2/0/3 port as a Trunk port for it to be added to/removed
■
from the voice VLAN. Bind VLAN 2 to Ethernet 2/0/3 as a voice VLAN.
Configure the OUI address to be 0011-2200-0000, with the description string
■
being test.
Configuration procedure
# Create VLAN 3.
<SW7750> system-view
[SW7750] vlan 3
[SW7750-vlan3] quit
# Configure Ethernet2/0/3 port to be a Trunk port, specify VLAN 3 as its default
VLAN, and permit packets of VLAN 3 to pass through the port.
[SW7750] interface Ethernet2/0/3
[SW7750-Ethernet2/0/3] port link-type trunk
[SW7750-Ethernet2/0/3] port trunk pvid vlan 3
[SW7750-Ethernet2/0/3] port trunk permit vlan 3
# Enable voice VLAN on Ethernet 2/0/3, set the voice VLAN operation mode of
Ethernet 2/0/3 to manual, and bind VLAN 3 to Ethernet 2/0/3 as a voice VLAN.
[SW7750-Ethernet2/0/3] voice vlan enable
[SW7750-Ethernet2/0/3] undo voice vlan mode auto
[SW7750-Ethernet2/0/3] voice vlan 3
# Specify an OUI address.
[SW7750] voice vlan mac-address 0011-2200-0000 mask ffff-ff00-0000 d
escription test
# Display voice VLAN-related configurations.
[SW7750] display voice vlan status
Voice Vlan security mode: Security
Voice VLAN Configuration Example 111