Console Port Login Configuration With Authentication Mode Being Password - 3Com 7757 Configuration Manual

42 C 3: L
HAPTER OGGING IN THROUGH THE
Console Port Login
Configuration with
Authentication Mode
Being Password
Configuration Procedure
C P
ONSOLE ORT
Network diagram
Figure 5 Network diagram for AUX user interface configuration (with the authentication
mode being none)
RS-232
Configuration cable
PC
Configuration procedure
# Enter system view.
<SW7750> system-view
# Enter AUX user interface view.
[SW7750] user-interface aux 0
# Specify not to authenticate users logging in through the Console port.
[SW7750-ui-aux0] authentication-mode none
# Specify commands of level 2 are available to users logging into the AUX user
interface.
[SW7750-ui-aux0] user privilege level 2
# Set the baud rate of the Console port to 19,200 bps.
[SW7750-ui-aux0] speed 19200
# Set the maximum number of lines the screen can contain to 30.
[SW7750-ui-aux0] screen-length 30
# Set the maximum number of commands the history command buffer can store
to 20.
[SW7750-ui-aux0] history-command max-size 20
# Set the timeout time of the AUX user interface to 6 minutes.
[SW7750-ui-aux0] idle-timeout 6
Table 16 Console port login configuration with the authentication mode being password
Operation
Enter system view
Console port
Switch
Command
system-view
Description
-