Port Binding Configuration Example - 3Com 7757 Configuration Manual

210 C 26: P
HAPTER ORT
Port Binding
Configuration
Example
B C
INDING ONFIGURATION
Network requirements
It is required to bind the MAC and IP addresses of Host A to Ethernet 2/0/1 on
switch A, so that Ethernet 2/0/1 can only forward packets coming from or going
to Host A.
Network diagram
Figure 54 Network diagram for port binding configuration
Host A
10.12.1.1 /24
MAC address: 0001 -0002 -0003
Configuration procedure
Configure switch A as follows:
# Enter system view.
<SW7750> system-view
# Enter Ethernet 2/0/1 port view.
[SW7750] interface Ethernet2/0/1
# Bind the MAC address and the IP address of Host A to Ethernet 2/0/1.
[SW7750-Ethernet2/0/1] am user-bind mac-addr 0001-0002-0003 ip-addr 10.12.1.1
Switch A
Eth2/0/1
Switch B
Host B