Displaying And Maintaining Gmrp; Gmrp Configuration Example - 3Com 7757 Configuration Manual

424 C 42: GMRP C
HAPTER
Displaying and
Maintaining GMRP
GMRP Configuration
Example
Enabling GMRP
ONFIGURATION
After the above-described configuration, execute the display command in any
view to display the running of the GMRP configuration, and to verify the effect of
the configuration.
Table 332 Display and debug GMRP
Operation
Display the GMRP
statistics information
Display the GMRP
global status
Network requirements
Implement dynamic registration and update of multicast information between
switches.
Network diagram
Figure 105 Networking diagram for GMRP configuration
Ethernet 2 / 0 / 1
Ethernet 2 / 0 / 1
SwitchA
Configuration procedure
Configure SwitchA:
# Enable GMRP globally.
<SW7750> system-view
[SW7750] gmrp
GMRP is enabled globally.
# Enable GMRP on the port.
[SW7750] interface Ethernet 2/0/1
[SW7750-Ethernet2/0/1] gmrp
GMRP is enabled on port Ethernet 2/0/1.
Configure SwitchB:
# Enable GMRP globally.
<SW7750> system-view
[SW7750] gmrp
GMRP is enabled globally.
# Enable GMRP on the port.
Command
display gmrp statistics
[ interface interface-list ]
display gmrp status
SwitchB
Description
Available in any view