3Com 7757 Configuration Manual page 883

Table 698 Configure jitter test on remote-ping client
Operation
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Configure the packet size
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
Configure the number of test
packets that will be sent in
each jitter probe
Configure the interval to send
test packets in the jitter test
Start the test
Display test results
6 Configuring SNMP test on remote-ping client
Table 699 Configure SNMP test on remote-ping client
Operation
Enter system view
Enable the remote-ping client
function
Create a remote-ping test
group and enter its view
Configure the test type
Command
count times
history-records number
datasize size
frequency interval
timeout time
tos value
jitter-packetnum number
jitter-interval interval
test-enable
display remote-ping results
[ admin-name operation-tag ]
Command
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation-tag
test-type snmpquery
Remote-ping Configuration
Description
Optional
By default, each test makes
one probe.
Figure 236 Optional
By default, the maximum
number is 50.
Optional
By default, the packet size is
68 bytes.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test
will be made.
Optional
By default, a probe times out
in three seconds.
Optional
By default, the service type is
zero.
Optional
By default, each jitter probe
will send 10 packets.
Optional
By default, the interval is 20
milliseconds.
Required
Required
You can execute the
command in any view.
Description
-
Required
By default, the remote-ping
client function is disabled.
Required
By default, no test group is
configured.
Required
By default, the test type is
ICMP.
883