Console Port Login Configuration With Authentication Mode Being Password; Configuration Procedure - 3Com 4200G 12-Port Configuration Manual

18 C 3: L
HAPTER OGGING IN THROUGH THE
Console Port Login
Configuration with
Authentication Mode
Being Password

Configuration Procedure

C P
ONSOLE ORT
3 Specify not to authenticate users logging in through the Console port.
[4200G-ui-aux0] authentication-mode none
4 Specify commands of level 2 are available to users logging into the AUX user
interface.
[4200G-ui-aux0] user privilege level 2
5 Set the baud rate of the Console port to 19,200 bps.
[4200G-ui-aux0] speed 19200
6 Set the maximum number of lines the screen can contain to 30.
[4200G-ui-aux0] screen-length 30
7 Set the maximum number of commands the history command buffer can store to 20.
[4200G-ui-aux0] history-command max-size 20
8 Set the timeout time of the AUX user interface to 6 minutes.
[4200G-ui-aux0] idle-timeout 6
Table 16 Console port login configuration with the authentication mode being password
Operation
Enter system view
Enter AUX user interface
view
Configure to authenticate
users using the local
password
Set the local password
Configure Set the
the Console baud rate
port
Set the
check mode
Set the stop
bits
Set the data
bits
Configure the command
level available to users
logging into the user
interface
Command
system-view
user-interface aux 0
authentication-mode password
set authentication password
{ cipher | simple } password
speed speed-value
parity { even | mark | none |
odd | space }
stopbits { 1 | 1.5 | 2 }
databits { 7 | 8 }
user privilege level level
Description
—
—
Required
Required
Optional
The default baud rate of an AUX
port (also the Console port) is
9,600 bps.
Optional
By default, the check mode of a
Console port is set to none, that
is, no check bit.
Optional
The default stop bits of a Console
port is 1.
Optional
The default data bits of a Console
port is 8.
Optional
By default, commands of level 3
are available to users logging into
the AUX user interface.