Network Diagram; Configuration Procedure - 3Com 4200G 12-Port Configuration Manual

20 C 3: L
HAPTER OGGING IN THROUGH THE
C P
ONSOLE ORT
The history command buffer can store up to 20 commands.
■
The timeout time of the AUX user interface is 6 minutes.
■

Network diagram

Figure 6 Network diagram for AUX user interface configuration (with the authentication
mode being password)
User PC running Telnet User PC running Telnet

Configuration procedure

1 Enter system view.
<S4200G> system-view
2 Enter AUX user interface view.
[4200G] user-interface aux 0
3 Specify to authenticate users logging in through the Console port using the local
password.
[4200G-ui-aux0] authentication-mode password
4 Set the local password to 123456 (in plain text).
[4200G-ui-aux0] set authentication password simple 123456
5 Specify commands of level 2 are available to users logging into the AUX user
interface.
[4200G-ui-aux0] user privilege level 2
6 Set the baud rate of the Console port to 19,200 bps.
[4200G-ui-aux0] speed 19200
7 Set the maximum number of lines the screen can contain to 30.
[4200G-ui-aux0] screen-length 30
8 Set the maximum number of commands the history command buffer can store to 20.
[4200G-ui-aux0] history-command max-size 20
9 Set the timeout time of the AUX user interface to 6 minutes.
[4200G-ui-aux0] idle-timeout 6
Ethernet1/0/1 Ethernet1/0/1
Ethernet Ethernet