Table of Contents
Advertisement
Allocating One High Byte to a Device
+0CH
+1CH
+2CH
4.
Click the OK Button to perform the I/O allocation.
Allocation Using a Drag-and-drop Operation
Drag-and-drop operation on an I/O Allocation Tab Page
1.
Display the Memory Block List where you want to allocate memory to the slave.
2.
Select the slave from the Registered Device List in the upper pane.
3.
Drag it to the start byte you want to allocate to the slave.
• Memory Block List Contents
In the Memory Block Lists at the bottom of the window, the allocated memory (i.e., word address and
start bit address) is displayed in the Ch column and the product name (i.e., model) of the slave to
which the memory is allocated is displayed in the Product Name column.
• Registered Device List Contents
In the Registered Device List at the top of the window, the node address is displayed in the # column,
the slave product name (i.e., model) in the Product Name column, the number of allocated bytes in
the Size column, and, when memory is already allocated, the start byte (i.e., word address and start
bit address) in the Ch column.
When deleting or changing allocations for slaves, select the slave from the Registered Device List and
click the Delete Button.
Note: To automatically allocate the next unused word to a slave, select the slave from the Registered Device
List and then click the Auto Button.
Auto-allocation
Auto/Delete Button on the I/O Allocation Tab Page
•
Click the Auto Button to allocate the next unused word for the I/O of the selected slave.
•
Click the Delete Button to release the I/O allocation of the selected slave.
If auto-allocation is specified, however, the Advanced Setup function described later cannot be used.
Displaying Slave Information
Information Button on the I/O Allocation Tab Page
Information, such as I/O comments of registered slave devices, can be accessed on the I/O Allocation Tab
Page. (To set I/O comments for the I/O data of the slave devices, select Edit I/O Comment from the Device
Menu.).
154
High
15
8 7
#00
Low
0
B Editing CS/CJ-series DeviceNet Unit Parameters
Advertisement
Table of Contents
