Table of Contents
Advertisement
Monitoring Using the Network Configurator
The user can monitor the times for safety input status, test output status, and safety output status using any
of the following methods:
(1) Select a device and select Device - Maintenance Information from the menu bar.
(2) Select a device and click the Maintenance Information Button on the toolbar.
(3) Right-click a device and select Maintenance Information from the pop-up menu.
(4) Select a device and select Device - Monitor from the menu bar. Click the Maintenance Tab in the dis-
played window.
(5) Select a device and click the Monitor Device Button on the toolbar. Click the Maintenance Tab in the
displayed window.
(6) Right-click a device and select Monitor from the pop-up menu. Click the Maintenance Tab in the dis-
played window.
Each time value can be cleared. Select the time to clear and click the Clear Value Button.
128
Section 7: Monitoring Devices
Advertisement
Table of Contents
