Table of Contents
Advertisement
Monitoring Using the Network Configurator
The user can monitor the operation time using any of the following methods:
(1) Select a device and select Device - Maintenance Information from the menu bar.
(2) Select a device and click the Maintenance Information Button on the tool bar.
(3) Right-click a device and select Maintenance Information from the pop-up menu.
(4) Select a device and select Device - Monitor from the menu bar. Click the Maintenance Tab in the dis-
played window.
(5) Select a device and click the Monitor Device Button on the toolbar. Click the Maintenance Tab in the
displayed window.
(6) Right-click a device and select Monitor from the pop-up menu. Click the Maintenance Tab in the dis-
played window.
•
The present value of the operation time is displayed for the Operation Time.
•
The slowest value of the operation time is displayed for the Operation Time (Peak).
•
If Threshold Response Time is set and the value exceeds the threshold value even once, "Alarm" will be
displayed for the Operation Time Exceed Hold.
The user can clear the Operation Time (peak) and Operation Time Exceed Hold values. Select an item to
clear and click the Clear Value Button.
132
Section 7: Monitoring Devices
Advertisement
Table of Contents
