Table of Contents
Advertisement
3.
Click the Set Button. The Destination Registration Window will be displayed. An example is shown be-
low.
Destination Registration Window
Registration
Name
Host (PC)
Information
Remote
Information
Setting the Network Address in the Host (PC) Information Area
Set the FINS node address of the computer.
The computer (i.e., the Network Configurator) uses the OMRON FINS communications service to con-
nect to the DeviceNet network via the Ethernet. It is necessary to set the FINS node address as well as
the IP address.
140
Set the registered name of the destination DeviceNet network. Up to 20 names can be
registered. A registration name can use up to 25 characters.
Computer (i.e., Network Configurator) settings
Network Ad-
Enter the FINS network address of the computer. Set the same value as
dress
the network address of the Ethernet Unit. Enter 0 to not set a network ad-
dress.
Node Ad-
Enter the FINS node address of the computer.
dress
Setting items for the DeviceNet and the Ethernet Unit that relay the connection to the De-
viceNet Network.
DeviceNet
Network Ad-
Unit
dress
Node Address
CPU Bus Unit
Number
Ethernet Unit Port Number
IP Address
Enter the FINS network address of the destination De-
viceNet Unit. Enter an address here to cross the network
farther than the Ethernet network directly connected to
the computer. Enter 0 when not crossing network layers.
Enter the node address of the destination DeviceNet
Unit. Enter an address here to cross the network farther
than the Ethernet network directly connected to the
computer. Enter 0 when not crossing network layers.
Enter the unit number of the destination DeviceNet Unit
as a CPU Bus Unit.
Enter the UDP port number for the FINS of the Ethernet
Unit.
Enter the IP address of the Ethernet Unit.
A Connecting to the Network via a CS/CJ-series PLC
Advertisement
Table of Contents
