Table of Contents
Advertisement
– To operate the master function, select a device, select Device - Properties, and then select the
Enable Master Function Option in the Property Dialog Box of the CS1W-DRM21(-V1)/CJ1W-
DRM21.
•
The Edit Device Parameters Window consists of the following 5 tab pages.
Tab page name
General
I/O Allocation (OUT)
I/O Allocation (IN)
Communication Cycle Time
Slave Function
Message Timer
144
Description
Registers devices in the Scan List and performs I/O allocations using
automatic setting.
Sets the OUT data allocation and OUT memory block of the CPU Unit
using the Advanced Setup.
Sets the IN data allocation and IN memory block of the CPU Unit using
the Advanced Setup.
Sets the communications cycle time.
Sets parameters for using the slave function.
Set the monitoring timer for message communications (the same time
is used for both explicit and FINS message communications).
B Editing CS/CJ-series DeviceNet Unit Parameters
Advertisement
Table of Contents
