Switch Settings; Photoelectric Module - Omron CQM1 Operation Manual

Switch Settings

Indicators
2-2 Switch Settings
2-2-1 E3X-MA11 Optical Fiber Photoelectric Module
E3C-MA11 Photoelectric Module
Operation Mode Selector
Timer Selector
142
Name
OPE
STAB
Note When the mode selector is set to SET, the operation indicator and stability
operation indicator are used to monitor teaching. Refer to 4-1-1 E3X-MA11
Optical Fiber Photoelectric Module for details.
Side View
Setting
Light on
Dark on
Setting
0 ms
10 ms
Color
Orange Lit when the control output is ON.
Green The stability operation indicator shows the stability
of detecting or non-detecting operations. The sta-
bility operation indicator will be lit when a sensing
object is located 0.93 times as near as the sensing
distance or less. The stability operation indicator
will be also lit when a sensing object is located 1.07
times as far as the sensing distance or more.
Timer selector
0 ms: No timer
10 ms: OFF-delay timer
(Refer to 2-2-2 E2C-MA11
Proximity Sensor Module for
details.)
The control output is ON when there is light incident.
The control output is ON when there is no light incident.
No timer
10-ms OFF delay timer active
Section 2-2
Function
Cable length switches
(Refer to 2-2-2 E2C-MA11
Proximity Sensor Module for
details.)
Function
Function