List Of Settings - Omron NX-AD series User Manual

6 Analog Input Units
6-4

List of Settings

The followings are the setting descriptions, setting ranges, and default values of the functions that can
be used in the Analog Input Units.
The settings are reflected after the Unit is restarted.
Precautions for Safe Use
The Unit is required to restart after the transfer of Unit operation settings on the Support Soft-
ware is completed. Always sufficiently check the safety at the connected devices before you
transfer the Unit operation settings.
Precautions for Correct Use
Set the Ch
If you disabled all channels for a Unit, an NX Unit Initialization Error event (event code:
84C10000 hex) occurs.
Two-point Input Units
Setting name
Ch1 Enable/Disable
Ch2 Enable/Disable
Ch1 Range Setting
Ch2 Range Setting
Ch1 Input Moving Aver-
age Time
Ch2 Input Moving Aver-
age Time
*1. The default value and setting range of Ch
ting range for each NX Unit are as follows.
NX-AD2203/AD2204/AD2208
NX-AD2603/AD2604/AD2608
6 - 8
Enable/Disable parameter to Enable for at least one channel for a Unit.
Description
Set to enable or disable
the channel.
FALSE: Disable
TRUE: Enable
Set the range.
0: 4 to 20 mA
1: 0 to 10 V
2: -10 to +10 V
3: 0 to 5 V
4: 1 to 5 V
5: 0 to 20 mA
Set the time to process
moving average.
Range Setting depend on the model. The default value and set-
NX Units
0
2
NX-series Analog I/O Units User's Manual for Analog Input Units and Analog Output Units (W522)
Default Setting
Unit
value range
TRUE TRUE or ---
FALSE
TRUE TRUE or ---
FALSE
---
*1 *1
---
*1 *1
0 μs
*2
0 μs
*2
Default value
0
2
Subin- Refer-
Index
dex ence
5002 01 hex P. 6-13
hex
02 hex
5003 01 hex P. 6-4
hex
02 hex
5004 01 hex P. 6-17
hex
02 hex
Setting range