Settings; Cable Connections; Wiring - Omron CQM1 Operation Manual

Settings

3-1 Settings
3-1-1

Cable Connections

3-1-2

Wiring

Voltage Output
Current Output
120
• Connect the power supply cable of the Analog Output Unit to the power
supply connector of the Analog Power Supply Unit and secure the power
supply cable connector with screws.
• The CQM1-IPS02 incorporates two power supply connectors. The power
supply cable of the Analog Output Unit can be connected to either one of
the power supply connectors.
• Refer to the CQM1H Operation Manual (W363) or the CQM1 Operation
Manual (W226) for details on connecting an Analog Output Unit and Ana-
log Power Supply Unit.
Note Do not pull the power supply cable, or the power supply cable may be broken
or connector may be disconnected.
Analog Output Unit Terminals
Analog Output Unit Terminals
Section 3-1