Teledyne 2000RS Operating Instructions Manual page 64

TCD Analyzer
a. Percentage (%)
b. PPM
II. When user clicks on the unit option, it toggles.
C. Low Limit
I. Based on the selected unit, low limit option will be
enabled. When the unit is PPM, user can't edit the range
low value.
II. When user clicks on the low option, keypad will appear in
the screen. Using the keypad user can enter the values. The
maximum limit is specified in the keypad.
III. The keypad screen is shown below:
a. Click on "DEL" button to delete the one character from
the Edit box.
b. Click on "ENT" Button to store the values and move
back to the parent (Application) screen.
c. Click on "Back arrow" on this screen, will move to
Application screen without saving edited values.
D. High Limit
I. When user clicks on the high limit option, keypad will
appear in the screen. Using the keypad user can enter the
values. The maximum limit is specified in the keypad.
II. Based on the unit, maximum limit will appear in the
keypad.
Teledyne Analytical Instruments
Operation
51