Auto Mode Zeroing - Teledyne 2000RS Operating Instructions Manual

Operation
Click /touch on "Zero Setting" edit box to toggle between "AUTO
"or "MANUAL".
AUTO: When user select auto mode, calibration will set to

auto mode and will calculate calibration offset automatically.
MANUAL: When user select manual mode, the user has to

press "ENTER" to manually indicate that slope got settled, if
accepted calibration offset will be calculated and saved into
memory.
Click/touch on "Touch to Start the Calibration" to start the calibration
process. Details about calibration run screens are as follows,
4.8.1.1 A M
UTO ODE
When the Zero calibration mode is set to Auto and the "Touch to
Start the Calibration" button is pressed, the Zero Auto Run screen is
displayed.
Teledyne Analytical Instruments
Z
EROING
2000RS
88