Table of Contents
Advertisement
TCD Analyzer
10.System status: "Cell Fail /Zero High" -> If there is an error,
System updates the current system on this status bar.
11.Mother Board Communication Status:
a. System shows "Green" symbol, when the communication
between front panel and mother board is proper.
b. System shows "Red" symbol, when the communication
between front panel and mother board is not proper.
Notification Bar at the bottom: This notification bar is
common for all the screens except Diagnostics and factory
reset.
12.After the zero, span or algorithm screen exists, if the
motherboard remains in the functions then system will display
the system mode as ZERO, SPAN or ALGO. In main screen
after 5 seconds system will change to the ANALYZE mode.
The Notification details is given below:
The bar at the bottom of the screen includes a menu select button,
an alarm indicator, and an icon indicating current communication status.
This bar will change in appearance depending on the selected function
or system notification.
Two types of notification bars are used in 2000RS user interface
(UI) screens:
1. Main Menu: This is the notification bar with the menu select
button displayed:
2. All other screens: All other screens except Diagnostic and
Factory reset screens have the Back button available to revert
back to the previous screen.
The notification bar has 2 navigate buttons and 3 status icons.
Teledyne Analytical Instruments
Operation
33
Advertisement
Table of Contents
