Table of Contents
Advertisement
TCD Analyzer
3. If only the span calibration is set to "ON" and the SAVE button
is pressed, the following pop-up message will appear:
4. If both zero and span calibration are set to "OFF" then no pop-up
messages will be displayed.
5. Clicking on the back button
the System screen. If any changes have been made, then a
message box will be shown asking: "Do you want to Save the
changes". Use the Yes or No buttons to answer and dismiss the
screen.
Teledyne Analytical Instruments
will move the display back to
Operation
45
Advertisement
Table of Contents
