Table of Contents
Advertisement
Operation
2. when user sends the remote programming ("rp") command from
the valve box, the system will disable the second layer protection for
application and algorithm setup option.
➢ In UI, when user access the application or algorithm setup
option the following screen appears.
➢ Here user must enter the password as "TETAIRS". It is factory
password. User can't change it.
➢ Once user entered the correct password system will remove the
second layer protection.
➢ When both the password protections are disabled, system won't
restrict the access for application and algorithm screen until the power
off or system log out or RS232 status message is disabled and then
enabled.
➢ If user enters the wrong password, then system will display the
"invalid password" error message. When user clicks the "OK" button,
system will go to system screen 2.
Teledyne Analytical Instruments
2000RS
48
Advertisement
Table of Contents
