System Screen - Teledyne 2000RS Operating Instructions Manual

Operation

4.5 System Screen

Clicking on the System button on the Menu screen will cause the
System screen to display.
The System screen contains 16 functions with 4 options displayed
per screen. Use the scroll bar on the right to view the various system
functions.
The System screen provides the following functions:
1. Screen 1: Password, Logout, Auto cal, Self-Test
2. Screen 2: Application, Algorithm, Cal Independent, Range
Polarity
3. Screen 3: VB Baud rate, Profibus, Analog Output, More
4. Screen 4: Version, System Status, Firmware Upgrade,
Factory Reset
Dragging the Scroll bar shows next 4 options. Click on any one of
the options to navigate to that function screen.
Any function can be selected at any time by navigating to the
proper System screen and pressing the appropriate onscreen button
(unless password restrictions apply). The order as presented in this
manual is appropriate for an initial setup.
Each of these functions is described in greater detail in the
following procedures. The display screen text that accompanies each
operation is reproduced, at the appropriate point in the procedure.
Teledyne Analytical Instruments
2000RS
36