Operation
In addition to setting the manual or automatic span mode and the
calibration hold time, this menu.
Calibration Hold Time:
To set the calibration hold time, touch the corresponding edit box to
bring up the numerical pad.
Enter the hold time using the keypad.
1. Click the "DEL" button to delete the one character at a time
from the Edit box.
2. Click the "ENT" Button to store the values and move back to
the parent Span Cal screen.
3. Click the "back arrow" to move to the Span Cal screen without
saving any edited values.
Teledyne Analytical Instruments
2000RS
94