Hardware, Interfaces And Zones; Hardware Overview; Multi-Gigabit - ZyXEL Communications USG FLEX H Series User Manual

Hardware, Interfaces and

3.1 Hardware Overview

This section describes the front and rear panels for each model.
The following table summarizes the port features of the Zyxel Device by model.
Table 12 USG FLEX Series Port Comparison Table
USG FLEX MODELS
USB 3.0 Ports
10 Gbps SFP+ interface
PoE+ Port
10/100/1000 Mbps Ethernet
Ports
Multi-Gigabit Ethernet Ports
Console Port
For information on interface names by model, default port or interface name mapping, and default
interface or zone mapping please see

3.1.1 Multi-Gigabit

Multi-Gigabit Ethernet ports automatically allow connections up to the speed of the connected network
device (100M, 1G, 2.5G, 5G, or 10G), and you just need to use a CAT 5e or CAT 6 Ethernet cable. You
must use CAT 6A or better Ethernet cables to achieve 10G speeds.
See the following table for the cables required and distance limitation to attain the corresponding
speed.
Table 13 Cable Types
CABLE
Category 5
Category 5e
Category 6
Category 6a
Category 7
USG FLEX USG FLEX
100H 100HP
1
-
-
8
-
1 (RJ45)
Section 3.4 on page
TRANSMISSION SPEED
100M
1G
1G / 10G
10G
10G
USG FLEX H Series User's Guide
C
USG FLEX
200H
1 1
- -
1 -
8 6
- 2
1 (RJ45) 1 (RJ45)
56.
MAXIMUM DISTANCE BANDWIDTH CAPACITY
100 m
100 m
100m:1G
37-50m:10G
100 m
100 m
43
H A P T E R
Zones
USG FLEX USG FLEX
200HP 500H
1 1
- -
1 2
6 8
2 4
1 (RJ45) 1 (RJ45)
100 MHz
100 MHz
250 MHz
500 MHz
600 MHz
3
USG FLEX
700H
1
2
2
8
4
1 (RJ45)