The Packet Capture Screen - ZyXEL Communications USG FLEX H Series User Manual

Table 203 Maintenance > Diagnostics > Diagnostics (continued)
LABEL
General Setting
Filename
Modified Time
Size
Copy the diagnostic file to
USB storage
Diagnostic files
Diagnostic files in USB
storage
Remove
Download
#
File Name
Size
Modified Time

27.3 The Packet Capture Screen

Click Maintenance > Diagnostics > Packet Capture to open the packet capture files screen. This screen
lists the files of packet captures stored on the Zyxel Device or a connected USB storage device. You can
download the files to your computer where you can study them using a packet analyzer (also known as
a network or protocol analyzer) such as Wireshark.
Figure 255 Maintenance > Diagnostics > Packet Capture
Chapter 27 Diagnostics
DESCRIPTION
This is the name of the most recently created diagnostic file.
This is the date and time that the last diagnostic file was created. The format is yyyy-
mm-dd hh:mm:ss.
This is the size of the most recently created diagnostic file.
Select this to have the Zyxel Device create an extra copy of the diagnostic file to a
connected USB storage device.
This lists the files of generated diagnostic information stored on the Zyxel Device.
This lists the files of generated diagnostic information stored in a connected USB
storage device.
Select files and click Remove to delete them from the Zyxel Device or the USB
storage device.
Click a file to select it and click Download to save it to your computer.
This column displays the number for each file entry. The total number of files that you
can save depends on the file sizes and the available storage space.
This column displays the label that identifies the file.
This column displays the size (in bytes) of a file.
This column displays the date and time that the individual files were saved.
USG FLEX H Series User's Guide
413