ZyXEL Communications USG FLEX H Series User Manual page 296

Figure 185 Security Service > Anti-Malware > Block List
The following table describes the fields in this screen.
Table 150 Configuration > Security Service > Anti-Malware > Block/Allow List > Block List
LABEL DESCRIPTION
Enable Block List Select this to bypass checking by this feature (if enabled) and automatically block incoming
files with names or hash value (MD5 Hash) that match the black list patterns.
Log These are the log options:
• no: Do not create a log when a packet matches a signature.
• log: Create a log on the Zyxel Device when a packet matches a signature.
MD5 Hash Configure the settings to automatically block incoming files with MD5 Hash value that match
the patterns you set.
Add Click this to create a new entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
Active To turn on an entry, select it and click Active.
Inactive To turn off an entry, select it and click Inactive.
Column ( ) Click the column icon to select the fields you want to show in the table. Uncheck the
checkbox if you want to hide a field in the table.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
Chapter 18 Anti-Malware
USG FLEX H Series User's Guide
296