Interface Screen - ZyXEL Communications USG FLEX H Series User Manual

Table of Contents

7.2 Interface Screen

Use this screen to view your Zyxel Device interface settings. To access this screen, click Network >

Interface > Interface.

Figure 83 Network > Interface > Interface

Each field is described in the following table.

Table 60 Network > Interface > Interface

Chapter 7 Interfaces

Click this to add a new entry.

Select an entry and click Edit to open a screen where you can modify the entry's settings.

To remove a virtual interface, select it and click Remove. The Zyxel Device confirms you

want to remove it before doing so.

To dial-up to a PPPoE interface, select it and click Connect.

To disconnect from a PPPoE interface, select it and click Disconnect.

USG FLEX H Series User's Guide