Table of Contents
Advertisement
C
HAP T ER
Set up zones to configure network security and network policies in the NXC.
Use the configure terminal command to enter Configuration mode in
order to use the commands described in this chapter.
17.1 Zones Overview
A zone is a group of interfaces. The NXC uses zones, not interfaces, in many security and
policy settings, such as firewall rules and remote management.
Zones cannot overlap. Each Ethernet interface or VLAN interface can be assigned to at most
one zone.
Figure 12 Example: Zones
NXC CLI Reference Guide
17
Zones
121
Advertisement
Table of Contents
