ZyXEL Communications USG FLEX H Series User Manual page 336

Figure 206 User & Authentication > User/Group > User > Add/Edit (User)
The following table describes the labels in this screen.
Table 167 User & Authentication > User/Group > User > Add/Edit
LABEL DESCRIPTION
User Name Type the user name for this user account. You may use 1-30 alphanumeric characters,
periods (.), at (@), underscores(
This value is case-sensitive. User names have to be different than user group names, and
some words are reserved. See
User Type Select the type of user account the Zyxel Device uses for the Local Administrator account
from the drop-down list box.
•
•
Select the type of user account the Zyxel Device uses for the User account from the drop-
down list box:
•
•
Password This field is not available if you select the Extent User type.
Enter a password consists of 4 to 64 characters for this user account, including 0-9a-zA-
Z'(){}<>^'+/:!*#@&=$\.~%,|;-"
Retype This field is not available if you select the Extent User type.
Chapter 23 User & Authentication
Section 23.1.3.1 on page
Admin- this user can configure the Zyxel Device settings using the web configurator or
CLI.
Viewer- this user can only view the Zyxel Device settings using the web configurator and
perform basic diagnostics for troubleshooting using the command line interface (CLI).
User - this user has access to the Zyxel Device's services and can also browse user-mode
commands (CLI).
Extent User - this user account is maintained on a remote server, such as RADIUS or LDAP.
See Ext-User Accounts on page 332
USG FLEX H Series User's Guide
336
), or dashes (-), but the first character cannot be a number.
_
334.
for more information about this type.