Zone Overview - ZyXEL Communications USG FLEX H Series User Manual

The following table describes the labels in this screen.
Table 114 Object > Service > Service Group > Edit
LABEL
Name
Description
Member List
Apply
Reset

14.3 Zone Overview

Set up zones to configure network security and network policies in the Zyxel Device. A zone is a group of
interfaces and/or VPN tunnels. The Zyxel Device uses zones instead of interfaces in many security and
policy settings, such as Secure Policies rules, Security Service, and remote management.
Zones cannot overlap. Each Ethernet interface, VLAN interface, bridge interface, PPPoE/PPTP interface
and VPN tunnel can be assigned to at most one zone. Virtual interfaces are automatically assigned to
the same zone as the interface on which they run.
Chapter 14 Object
DESCRIPTION
Type the name used to refer to the service group. You may use 1-30 single-byte characters,
including 0-9a-zA-Z!"#$%'()*+,-/:;=?@_, but the first character cannot be a number.
&.<>[\]{|}^'are not allowed.
This value is case-sensitive.
Type the description used to refer to the service group. You may use 1-30 single-byte
characters, including 0-9a-zA-Z!"#$%'()*+,-/:;=?@_, but the first character cannot be a number.
&.<>[\]{|}^'are not allowed.
This list displays the names of the service and service group objects that have been added to
the service group. The order of members is not important.
Select items from the list on the left that you want to be members and move them to the list on
the right. Move any members you do not want included to the list on the left.
Click Apply to save your customized settings and exit this screen.
Click Reset to return the screen to its last-saved settings.
USG FLEX H Series User's Guide
222