ZyXEL Communications USG FLEX H Series User Manual page 398

How to add this Zyxel Device to SecuReporter
Log in to the SecuReporter portal.
1
Go to More > Organization & Devices, click Add Organization to create an organization.
2
Add this Zyxel Device to the organization you created using the hyper link under Unclaimed.
3
Click Log & Report > SecuReporter to open the following screen.
Figure 245 Log & Report > SecuReporter
The following table describes the labels in this screen.
Table 198 Log & Report > SecuReporter
LABEL
Enable
Categories
Apply
Reset
Chapter 25 Log and Report
DESCRIPTION
This must be enabled to have SecuReporter collect and analyze logs from this Zyxel
Device.
It's selected by default if you have activated a SecuReporter license.
Select the categories of logs that you want this Zyxel Device to send to SecuReporter for
analysis and trend spotting.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
USG FLEX H Series User's Guide
398