ZyXEL Communications USG FLEX H Series User Manual page 405

Do not turn off the Zyxel Device while configuration file upload is in
progress.
The following table describes the labels in this screen.
Table 200 Maintenance > File Manager > Configuration File
LABEL DESCRIPTION
Configuration
Rename Use this button to change the label of a configuration file on the Zyxel Device. You can only
rename manually saved configuration files. You cannot rename the lastgood.conf, system-
default.conf and startup-config.conf files.
You cannot rename a configuration file to the name of another configuration file in the Zyxel
Device.
Click a configuration file's row to select it and click Rename to open the Rename File screen.
Specify the new name for the configuration file. Use up to 63 characters (including a-zA-Z0-
9;'~!@#$%^&()_+[]{}',.=-).
Click OK to save the renamed label or click (
renamed label.
Remove Click a configuration file's row to select it and click Remove to delete it from the Zyxel Device.
You can only delete manually saved configuration files. You cannot delete the system-
default.conf, startup-config.conf and lastgood.conf files.
A pop-up window asks you to confirm that you want to delete the configuration file. Click OK
to delete the configuration file or click Close to close the screen without deleting the
configuration file.
Download Click a configuration file's row to select it and click Download to save the configuration to your
computer.
Copy Use this button to save a duplicate of a configuration file on the Zyxel Device.
Click a configuration file's row to select it and click Copy to open the Copy File screen.
Specify a name for the duplicate configuration file. Use up to 63 characters (including a-zA-Z0-
9;'~!@#$%^&()_+[]{}',.=-).
Click OK to save the duplicate or click (
the configuration file.
Apply Use this button to have the Zyxel Device use a specific configuration file.
Click a configuration file's row to select it and click Apply to have the Zyxel Device use that
configuration file. The following screen displays. Click OK to have the Zyxel Device start
applying the configuration file or click Cancel to close the screen.
Figure 252 Apply a Configuration File
Email Use this button to have the Zyxel Device sends the selected configuration file to the configured
email addresses.
Click a configuration file's row to select it and click Email to have the Zyxel Device mail that
configuration file. The following screen displays.
Chapter 26 File Manager
USG FLEX H Series User's Guide
405
) to close the screen without saving the
) to close the screen without saving a duplicate of