Reboot; Chapter 28 Reboot; Overview; The Reboot Screen - ZyXEL Communications USG FLEX H Series User Manual

28.1 Overview

Use this to reboot the Zyxel Device.

28.2 The Reboot Screen

To access this screen, click Maintenance > Reboot/Shutdown.
When you click Reboot or Shutdown, your current configurations made using the web configurator are
saved. Your current configurations made using the command line interface (CLI) are not saved if you
didn't use the copy running startup command to save the current configurations as the startup
configurations.
Click Reboot to reboot the Zyxel Device without turning the power off.
Click Shutdown to prepare the Zyxel Device to turn off. Wait for the PWR/SYS LED to turn off before you
remove the Zyxel Device power cable.
Figure 260 Maintenance > Reboot

Chapter 28 Reboot

C
USG FLEX H Series User's Guide
422
H A P T E R

Reboot

28