The Ip Exception Screen - ZyXEL Communications USG FLEX H Series User Manual

• Anti-Malware
• URL Threat Filter
• IPS (Intrusion Prevention System)
• IP Reputation.
• DNS Threat Filter

21.2 The IP Exception Screen

Use this screen to view the IP exception list for the specified services. The Zyxel Device will not inspect
incoming packets that match the listed source and destination IP address(es) with the specified
services.
Click Security Service > IP Exception to display the following screen. Use Add to put a new entry in the list
or Edit to change an existing one or Remove to delete an existing entry.
Figure 195 Security Service > IP Exception
The following table describes the fields in this screen.
Table 157 Security Service > IP Exception
LABEL
Configuration
Add
Edit
Remove
#
Name
IPv4 Source
IPv4 Destination
Service to Bypass
Log
Chapter 21 IP Exception
DESCRIPTION
Click this to create a new entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
This is the entry's index number in the list.
This field displays the descriptive name of this entry.
This field displays the source IP address (or address object) of incoming traffic. It displays any if
there is no restriction on the source IP address.
This field displays the destination IP address (or address object) of incoming traffic. It displays
any if there is no restriction on the destination IP address.
This field displays which services will not inspect matched packets.
This field displays if the Zyxel Device will generate a log when the incoming traffic is in the
exception list.
USG FLEX H Series User's Guide
315