Time Zone; Chapter 11 Time Zone; Time Zone Overview; The Time Zone Screen - ZyXEL Communications FMG Series User Manual

11.1 Time Zone Overview

Use the Time Zone screen to setup the system time and SNTP (Simple Network Time Protocol) server
settings.

11.2 The Time Zone Screen

In the navigation panel, click Maintenance > Time Zone to display the screen as shown.
Figure 28 Maintenance > Time Zone
The following table describes the labels in this screen.
Table 21 Maintenance > Time Zone
LABEL
Current Time
Time Zone Select
Enable Daylight
Saving Time
Enable SNTP
Client Update
SNTP Server
Apply
Refresh
DESCRIPTION
This field displays the time of your FMG.
Each time you reload this page, the FMG synchronizes the time with the time server.
Select the time zone from the dropdown list.
Select the check box to use Daylight Saving Time to offset the system time or clear the check
box to not adjust system time.
Select the check box to enable using a simple network time protocol (SNTP) server to manage
the system time or clear the check box to manually manage system time.
Enter the address of the simple network time protocol (SNTP) server as an IP address
(192.168.0.1) or as a URL (www.zyxel.com).
Enter the port number of the SNTP server. The numeric value can be between 1 and 65535.
Click Apply to save the changes.
Click Refresh to reload the page.
FMG Series User's Guide
C
H A P T E R

Time Zone

44
11