Ol Unscreened Call Transfer To Station; Unscreened Call Transfer To Remote - Panasonic KX-T336 System Reference Manual

1.03 Unscreened Call Transfer to
Remote
Description
Operation
During a conversation with an extension or an
outside party
Allows the extension assigned as operator to
transfer a caii to the remote maintenance
resource. Modem answer tone is returned
' instantly, if it is not in use.
This operation allows System Administrator to
perform System Administration from Remote
Location.
Refer to Section 14-B-2.00 "System
Administration from a Remote Location" for
further information.
1. Press the switchhook for
approximately one half second
and release.
l
The other
party is placed on
Consultation Hold.
. You hear confirmation tone 2,
then dial tone 1 or 3 or 4.
' 3
To transfer a call to remote maintenance
resource, "FDN for Remote" is used, which is
assigned in "System-Operation", Remote
Directory Number.
See Section 3-B-3.00 "Floating Directory Number
(FDN)" for details of FDN.
Programming
System Programming
Reference
VT I Dumb
"System-Operation (2/3)",
Remote Directory Number
9-D-l 42 10-C-4.00
Conditions
If Music on Hold is assigned, the system sends
Music on Hold to the transferred party during the
transferring operation. For details, refer to
Section 3-E-l .OO "Music on Hold."
If the reinote maintenance port is in use,-busy -
tone is returned to the held party. Automatic
Callback does not function in this case, so the
caller should
call again when it becomes idle.
If an extension other than the operator dials the
FDN for Remote, reorder tone is returned.
2. Dial the "FDN for Remote": three
or four digits.
l
You hear confirmation- tone 3,
then dial tone 1 or 3 or 4.
l
If the remote maintenance port
is not in use, the held party
hears answer tone and can
start communication instantly.
3. Replace the handset.
. .
--.
Operators can execute this function even after
holding another call.
5-D-3