Dialed Number Display; Duration Trne Of Call Display - Panasonic KX-T336 System Reference Manual

This is a function for the user of
a PITS
with the
display to see the dialed
number of the other
party shown on the display. It is displayed when
the user is
calling an extension or an outside
party
and also when talking with it.
4.02 Dialed Number
Display
4.03 Duration Time of
Call Display
Description Description
This function permits a PITS with the display to
show the
duration of an incoming or outgoing CO
call by second.
This function does not apply to extension calls.
Programming
None
Conditions
None
Operation
The following is an example of the display when
calling an extension.
. .
Operation: Display:
Lift the handset.
I
Dial "1 .n
I
1 I
Dial "2."
Dial "3."
12
I
1231
Callina the extension. 1 1 2 3 : Jack I
An example of the display is shown below:
1 DDD02 1:30' 25 ]
lc second
minute
hour
For an incoming call from an outside party, the
duration starts at the time an extension answers
the call.
For outgoing calls to outside patties, the starting
time of count is assignable in "System-System
Timer", SMDR Duration Time.
.-..
Programming
System Programming
Reference
VT
I
Dumb
' System-System TmW.
SMDR Duration Time
9-D-3.00 1o-G6.00
.
Conditions
Holding of an outside party or in conference with
outside parties is also counted as part of the
duration. Consequently when returning to the
conversation with the party after retrieving the
hold or after concluding the conference, the
display shows the continued period including the
period of the hold or the conference.
The display duration is held for five seconds after
the handset is replaced.
Operation
None
4-A-21