Co Access Control - Panasonic KX-T336 System Reference Manual

10.00 CO Access Control
Description
The attendant cz. c;.-z:o: L.Z :.x.. :z pre.,nt
them from being accesscz *-;c: t' <:E WC-: oy
employing CO Manageme-: SW+-'.
If CO busy out is assigned fo a CC line, bzh ex-
tensions and attendant consoles cannot access
the line.
Refer to Section 3-F-8.00 "CO Busy Out" for
further information.
If CO access ctrl is assigned to a CO line. %-ten-
sions cannot access tne line.
CO busy out can also be set by dialing the
feature number for "Busy Out Trunk.'
Programming
I
System Program5ng
I
3efewce
/ VT 1 Dumb
"System-Numbering Pian (9/g)", 9-D-&09
-:-c-t j.00
Busy Out Trunk
Unbusy Trunk
Operation
Sett!cg CO busy out by dialing the feature
numoer
(Supplement)
To cancel "CO Busy Out," diai the feature number
for Wnbusy Trunk" and trunk port physical
number in succession.
Press an idle LOOP key.
l
The SRC indicator lights and
dial tone sounds.
Dial the feature number for "Busy
Out Trunk" and trunk port physi-
cal number in succession.
l
Confirmation tone sounds and
the LOOP key is released
automaticafly.
Conditions
None
6-J-22