Distinctive Dial Tone - Panasonic KX-T336 System Reference Manual

13.00 Distinctive Dial Tone
The following condi: ens apply when originating a
CO call with an SLT.
cl> When the first digit was not dialed within 10
seconds after dial tone was heard.
c2> When the five second interdigit timer expires
when dialing on a CO line.
<3> When the first digit was not dialed before the
External First Digit Timer Time-Out expires
after the CO diai tone was heard
c4>
When the External Interdigit Time-Out
expires during dialing.
Description
Multiple dial tone patterns are presented to the
extension user to give some information about
selected lines, features set to the lines, etc.
There are five dial tone types, as follows:
Dial tone 1 : Normal dial tone, sounds when
calling on DN buttons.
Dial tone 2 : Sounds to request an account code
entry or DISA user code entry, or
sounds when an extension goes
off-hook after Timed Reminder.
Dial tone 3 : Sounds if the extension user has
set any of the following features:
l
Do Not Disturb
l
Call Forwarding
l
Absent Message
l
Timed Reminder
l
Walking Station
l
Walking COS
Dial tone 4 : Sounds if the extension user has
set UCD Log Out.
.I
Dial tone 5 : Sounds when intercom calling (only
for PITS's).
Programming
None
Conditions
The patterns for dial tone are listed in Section 3-
B-l 6.00 "Tone and Ringing Patterns."
3-B-22