Call Forwarding (Fwd); Call Forwarding-All Calls - Panasonic KX-T336 System Reference Manual

2.00 Call Forwarding (FWD)
2.01 Call Forwarding-All Calls
Description
Call Forwarding-All Calls allows extension users
who are away from their phones to receive
incoming calls (both extension and CO) at
another extension.
Incoming calls can be forwarded to extension
users, Voice Mail ports, or operators (Attendant
Console or Extension).
' FDN for General Operator Call" can be used to
assign operators as the destination of Call
Forwarding.
Refer to Section 9-D-l .Ol "Operation (l/3)" for
further information.
The following incoming calls do not receive Call
Forwarding treatment.
l
A call appearing on ICM button
l
A call from doorphone
l
A call appearing on PC0 button
7
l
A call routed via DIL 1: N feature
&4
l
A call directed to a UCD group
To execute Call Fonvarding-All Calls, assign
' System-Class of Service", Call Forwarding/Do
Not Disturb to "Yes."
To set or cancel this function, the following two
methods are available:
cl> By pressing the FWD/DND button.
c2>
By dialing the feature number for
"Call Forwarding-All Calls Ser and
"Call Forwarding-Do Not Disturb Cancel."
Programming
System Programming
"System-Class of Service (l/2)=,
Call Forwarding& Not
Disturb
' System-Numbering Plan (4/g)",
Call Forwarding-All Call Set
' System-Numbering Plan (5/9)",
Call ForwardinglDo Not
Disturb Cancel
Rei
VT
9-O-4.01
9-0-6.04
9-O-6.05
13c7.00
10-6-10.00
10-c-10.00
Conditions
To set or cancel this function, use the PDN
button.
An extension user may have only one type of
Call Forwarding/Do Not Disturb feature in effect
at any time. If a second type is assigned, the
previously assigned type is canceled.
Call Forwarding-All Calls feature functions even if
the extension is in the PITS programming mode.
If the extension to which calls are to be
forwarded itself is in a call forward mode, a call is
not forwarded furthermore. The call rings at the
first forwarded extension. In case of an outside
call, if not answered in a specified time period,
the call will be routed to another destination, if
available, based on the ' Intercept Routing-No
Answer" feature.
If Tenant Service is employed and ' Inter Tenant
Calling" is assigned to ' Yes" by programming,
this function is ineffective for the calls from
another tenant if the destination of Call
Forwarding-All Calls is set to an Attendant
Console.
Calls from any VM extension will not be
forwarded, if forwarding destination is another
VM extension.
An extension user is rejected with reorder tone if
he or she attempts:
l
To set the destination to an extension in the
other tenant when Tenant Service is employed.
l
To set the destination to another extension that
presets its own destination to the users
extension.
l
To call another extension that presets its
destination to the user' s extension.
The Operators (Attendant Console or Extension)
can cancel the Call Forwarding/Do Not Disturb
feature assigned to the extension users. Refer to
Section 4-1~11 .OO Remote Station Feature
Control."
4-F-6
(21292)