Panasonic KX-T336 System Reference Manual page 461

Operation by Caller
(At message sender' s extension)
Setting the Message Waiting Indication
1. Lift the handset or press the
SP-
PHONE button.
2. Dial the extension number of the
other party.
l
You hear ringback tone, or
busy tone 1 or 2, or DND tone.
-1 3. Press the MESSAGE button.
I = .
.
You hear confirmation tone 2
and then dial tone 1 or 3 or 4.
The MESSAGE indicator of the
other extension lights.
4. Replace the handset or press the
SP-PHONE button.
Canceling the Message Wafting Indication on
receiver' s extension set by a caller
1. Lii the handset or press the SP-
PHONE button.
2. Dial the feature number for
%&sage Cancel Y#9" j&fault)
and the extension number of the
message receiver successively.
l
You hear confirmation tone 2
and then dial tone
1
or 3 or 4.
l
If the other extension received
only one message, the
MESSAGE indicator of the
other
extension goes out.
3. Replace the handset or press the
SP-PHONE button.
Operation by Receiver
(A' message recetvsrs extension;
Cahng back
the message sender
1. Lift the handset or press the
SP-
PHONE button.
2. Press the MESSAGE button that
is lit.
l
You hear ringback tone. When
the message sender answers,
start conversation.
l
If you received multiple
messages, catfing back the first
message sender is performed.
At the conclusion of the
conversation, the first message
is canceled.
l
At the conclusion of the
conversations with all the
message senders, the
MESSAGE indicator goes out.
Canceling all Message Waiting tndications on
your extension
1. Lift the handset or press the SP-
PHONE button.
2. Dial the ieature number for
f@essa$+e.Cancel?V9" (default)
and your own extension number
in succession.
l
You hear confirmation tone 2
and then dial tone 1 or 3 or 4.
l
The MESSAGE indicator on
receiver' s extension goes out.
3. Replace the handset or press the
SP-PHONE buttoh.
4-l-l 6
(30393)