3-B-L 7 - Panasonic KX-T336 System Reference Manual

Conditions
1. UNA and TAFAS
Call handling in UNA is identical to TAFAS.
The difference is that TAFAS is available in
day mode and UNA is available in night
mode.
For further information about TAFAS, refer to
Section 4-D-4.00 "Trunk Answer From Any
Station (TAFAS)-Day Service."
2. IRNA and Rerouting
If incoming CO calls are not answered for any
reason within a specified time period, the
caller will receive Rerouting or IRNA
treatment.
For further information, refer to section 3-F-6.
00 "Rerouting" and Section 3-F-5.00
"Intercept Routing-No Answer (IRNA)."
3. Remote Administration
To execute the system administration from a
remote location at night, select "RMT" for
' Trunk-CO Line" Night Answer Point
assignment.
For further information about remote
administration, refer to Section 14-B-2.00
"System Administration from a Remote
Location."
4. Tenant Service
If tenant service is employed, each tenant (1
and 2) can have a unique Night Service
arrangement individually.
The affiliation pf each external pager is
determined by the system programming in
' Trunk-Pager & Music Source", External
Pager- Tenant.
Extension users cannot answer the UNA calls
ringing at an external pager in the diierent
tenant.
Operation
Refer to the following:
(PITS) Section 4-l-l .Ol "Universal Night
Answer (UNA)"
(SLT) Section 5-G-l .Ol "Universal Night
Answer (UNA)"
8.03 Flexible Night Service
DescriptBon
Flex&e
Kqn:
Service allows the Operator 1
(AttendaT Console or Extension user) to change
the assignea night answer destination on a CO
line bavs cy dialing the feature number for
"Flexibie Night Service."
To utilize this feature, set "Group-Trunk Group"
Incoming Mode (Night) to FLEXIBLE. All CO
lines which belong to this trunk group are
covered by this assignment.
If FIXED is selected for the above setting, the
assigned night answer destination can not be
changed by the Operator l_
Call handling in Flexible and Fixed night service
is almost the same.
The difl erence is:
Flexible
I
The Operator 1 (Attendant Console
I
or Extension) can change the night
answer destination.
Fixed
' A group of extensions (Night
Answer Group) can be assigned as
the destination of one or more CO
, lines in night mode
Programming
System Programming
"Group-Tank Group (l/2)".
IncomIng Mode (Night)
"Trunk-CO Line",
Night Answer Point
"System-Numbering Plan (8/9)"
Flexibia Night Service
Conditions
Tenant Service
. .
Refc
VT
SE-1 .Ol
SF-l.00
SO608
once
Dumb
lo-c-14.00
10-C-18.00
1o-G10.00
If tenant service is employed, the night answer
destination for a CO line can only be changed by
the Operator 1 in the same tenant.
Operation
For the operation of changing the Night Answer
destination. refer to the following:
(PITS) Section 4-l-l .02 "Flexible Night Service"
(SLT) Section 5-G-l .02 "Flexible Night Service"
(ATT) Section 6-J-l .Ol "Flexible Night Service"
3-B-l 7
(30393)