Call Forwarding-Busy/Off-Hook - Panasonic KX-T336 System Reference Manual

2.02 Call Forwarding-Busy/Off-Hook
Description
Cal; Forwardlrg-Busy.Off-Hook
provides
atiiomatic c&t
irW&er
to a preset destination
when the "ser' s eztension is busy or off-hook.
Incoming caiis can be forwarded to extension
users, Voice tv?ail ports, or operators.
"FDN for General Operator Call" is used to assign
operators as the destination of Call Forwarding.
Refer to Section 9-D-l .Ol Operation (l/3)" for
further information.
The following incoming calls do not receive Call
Forwarding treatment.
l
A call from doorphone
l
A call routed via DIL 1: N feature
l
A call directed to a UCD group
To set Call Forwarding-Busy/Off-Hook, assign
"System-Class of Service", "Call Forwarding/Do
Not Disturb" to "Yes."
To set and cancel this function, dial the feature
Calls from any VM extension will not be
number for "Call Forwarding-Busy Set," and
forwarded, if forwarding destination is another
"Call Forwarding/Do Not Disturb Cancel."
VM extension.
Programming
System Programming
Reference
t
VT 1 Dumb
"System-Class of Service (l/2)",
Call Forwarding/Do Not
Disturb
!
"System-Numbering Plan (4/g)",
Call Forwarding-Busy Set
"System-Numbering Plan (5/g)' ,
Call Forwarding/Do Not
Disturb Cancel
~ 9-D-4.01
9-o-6.04
9-O-6.05
1 o-c-7.00
104-10.00
10-c-10.00
Conditions
An extension user
may have only one type of
Call
Forwarding/Do Not Disturb feature in effect
at any time. If a second type is assigned, the
previously assigned type is canceled.
If the extension to which calls are to be
forwarded itself is in a call forward mode, a call is
not forwarded furthermore. The call rings at the
first forwarded extension. In case of an outside
call, if not answered in a specified time period,
the call will be routed to another destination, if
available, based on the "Intercept Routing-No
Answer" feature.
If Tenant Service is employed and "Inter Tenant
Calling" is assigned to ' Yes" by programming,
this function is ineffective for the calls from
another tenant if the destination of Call
Forwarding-Busy/Off-Hook is set to an Attendant
Console.
The following attempt will be rejected with
reorder tone.
.
l
If Tenant Service is employed, the user cannot
set the destination to an extension in the other
tenant.
l
The extension user cannot set the destination
to another extension that presets&own
destination to the user' s extension.
l
The extension user cannot call another
extension that presets its destination to the
user' s extension.
The Operators (Attendant Console or Extension)
can cancel the Call Forwarding/Do Not Disturb
feature assigned to the extension users. Refer to
Section 5-G-9.00 "Remote Station Feature
Control."
5-D-7
(21292)