External Feature Access - Panasonic KX-T336 System Reference Manual

9.00 External Feature Access
Description
Operation
Gaining access to a feature (in
this
case, Call
Waiting) (1)
Sending a flash signal through the CO line allows
the extension to gain access to the features
offered by the host PBX, or to receive centrex
service provided by the central office, such as
Call Waiting and so on.
External Feature Access is effective only during a
1 :l conversation with an outside party.
A call arrives from another outside party during a
conversation with an outside party.
l
You hear call waiting tone.
1. Press the TRANSFER button.
Programming
l
You hear dial tone 1 or 3 or 4.
System Programming
Reference
v-f Dumb
"System-Numbering
Plan (3/g)' ,
9-D-6.03 10-C-10.00
External Feature Access
"Group-Trunk Group (l/2)",
9-E-1 .Ol 1 O-C-l 4.00
Hook Switch Flash Time
"Group-Trunk Group (2/2)",
9-E-1.02 10-C-15.00
Max. Dial No. after EFA Signal
"Extension-Station (2/3)",
g-G-1.02 10-C-24.00
DN Key Type
tat
E!a
2. Dial the feature number for
4tie
780
"External Feature Access."
*
l
The first party is held. Start
conversation with the second
party.
'Extension=statioTI (3/3)".
PF Key Type
DSS Key Type
9-G-l .03
1 o-c-25.00
1 O-C-26.00
Finishing conversation with the second party and
starting conversation with the first party again
1. Press the TRANSFER button.
l
You hear dial tone 1 or 3 or 4.
PITS Station Programming Reference
DN (Directory Number) Button
Assignment
12-c-l 90
2. Dial the feature number for
"External Feature. Access."
PF (Programmable Feature) Button
Assignment
DSS (Direct Station Selection) Button
Assignment
12-c-2.00
12-G3.00
0 Start conversation with the first
party.
Conditions
Gaining access to a feature (in this case, Call
Waiting) (2)
External Feature Access is ineffective when
"Group-Trunk Group", Hook Switch Flash lime is
assigned to "None."
The maximum dialing digits to be sent to the CO
line after sending the flash signal are restricted
by "Group-Trunk Group", Max. Dial No. after EFA
Signal.
The longest time limit among the following
assignments determines the time limit between
dialing digits.
A call arrives from another outside party during a
conversation with an outside party.
. You hear call waiting tone.
1. Press the External Feature
Access button.
l
The first party is held. Start
conversation with the second
PW.
l
"System-System 3mer", External Firstdigit
Time-Out.
l
"System-System Timer, External Interdigit
Time-Out.
Finishing conversation with the second party and
starting conversation with the first party again
I. Press the External Feature
Access button again.
l
"System-System Timer", Toll Restriction
Guard Time-Out.
l
Start conversation with the first
PaW.
-
4-G-l 5