Operator - Panasonic KX-T336 System Reference Manual

5.00 Operator
Description
The system allows the operator to answer,
monitor and control the incoming calls.
Up to two operators (operator 1 and 2) can be
assigned in the system.
If tenant service is employed, up to two operators
can be assigned to each tenant individually.
Not only the ATT (attendant console) operator but
the extension user can be assigned as an
operator.
"Operator 1" must always be selected when only
one operator is assigned.
If an attendant console is connected to the
system, the operator assignment should be
arranged as follows.
(When one attendant console is connected)
operator 1
Fj or p
Operator 2 extension
(When two attendant consoles are connected)
Operator 1 1 AlT 1
Operator 2 I
ATr I
The operator assignment can be done in the
system programming "System-Operation (3/3)."
dperatdr 1 and O$&tor 2.
The following list shows the special functions available with each operator.
14 Local Alarm Indication
0
0
X
15 Remote Timed Reminder
0 0*
0'
l
In case of an extension, only a PITS with display is available.
0
: available
x : not available
3-B-8
(40993)