Call Forwarding To Trunk ............................................................. . . 4-F-L - Panasonic KX-T336 System Reference Manual

2.05 Call Forwarding to Trunk
Description
Programming
Call Forwarding to Trunk
allows extension users
who
are away from their phones to receive
incoming
calls (both
CO and extension) at outside
place.
The following incoming calls do not receive Call
Forwarding treatment.
l
A call appearing on ICM button
l
A call from doorphone
l
A call appearing on PC0 button
l
A call routed via DIL 1: N feature
l
A tail directed to a UCD group
_
Reference
System Programming
VT Dumb
"System-Class of Service (l/2)", 9-D-4.01 10-C-7.00
Call Forwarding/Do Not
Disturb
CO Forward Mode
"System-Numbering Plan (4/g)", SD-6.04 10-C-10.00
Call Forwarding-to Trunk
"System-Numbering Plan (5/g)", 9-D-6.05 10-C-10.00
Call Forwarding/Do Not
Disturb Cancel
' Group-Trunk Group
(l/2)",
9-E-l .Ol 1 O-C-1 4.00
CO-CO Duration Limit
When an incoming CO call is forwarded to the
pre-assigned outside party by this feature, CO to
CO call via this system is established. Duration
time of CO to CO call is restricted by ' Group-
Trunk Group," CO-CO Duration Limit of receiving
CO line. The system sends alarm tone to both
Conditions
To set or cancel this function, use the PDN button.
. parties 15 seconds before the Duration Limit time
is expired, and when expired the system
disconnects both parties compulsively.
An extension user may have only one type of Call
Forwarding/Do Not Disturb feature in effect at any
time. If a second type is assigned, the previously
assigned type is canceled.
To set Call Forwarding to Trunk, assign both
"System-Class of Service", Call Forwarding/Do
Not Disturb and CO forward Mode to "Yes."
The Operators (Attendant Console or Extension)
can cancel the Call Forwarding/Do Not Disturb
feature assigned to the extension' tisers. Refer to
Section 4-l-l 1 .OO "Remote Station Feature
Control."
For setting and canceling this function, two
methods are available:
cl> By pressing the FWD/DND button.
~2s.
By dialing the feature number for
"Call Forwarding-to Trunk" and
1s.T.
*Call Forwarding/Do Not Disturb Cancel."
Up to 32 digits composed of "0 through 9" and ' * "
can be entered as the telephone number of the
destination. CO line access code must be
entered as the leading digit of each entry.
4-F-18