Panasonic KX-T336 System Reference Manual page 177

2.00 Automatic Route Selection
(A w
Description
Automatic Route Selection (ARS) is a system
programmab!e feature that automatically selects
the least expensive route available at the time an
outgoing CO calf is made. It is executed by dialing
the feature number for 'ARS/Local CO Line
Access" from a DN button, then making a long
distance call or local call.
To utilize the ARS feature, program the preferred
call routing plan
in the system
programming
"Automatic Route Selection," then set "System-
Operation", Automatic Route Selection to "Yes."
Programming _
SystemProgramming
"System-Operation",
Automatic Route Selection
Home Dialing Plan
"System-Numbering Plan (2'9)'.
AM/Local CD Line Access
'Automatic Route Selection",
Leading Digit Table
Offii code Tables
(ARS)
Route Plan Tables
Route Lists Tables
Modified Digit Tables
Condtions
Reference
VT Dumb
g-D-1.01 1o-c-4.00
w-6.02 lo-c-10.00
g-J-1.00 lo-c-35.00
g-J-2.00 1oG36.00
g-J-3.00 lo-c-37.00
9-J-4.00 lo-c-38.00
SJ-5.00 lo-c-39.00
Automatic Route Selection is applied after the toil
restri bn procedure.
Automatic Route Selection is ineffective for
telephone numbers which start with "10," "11."
"* " or Y#." When a caller dials those numbers,
he hears reorder tone.
ARS is restricted by "System-Class of Service",
ARSRocai Access. as follows:
If "No ACCS" (No Access) is set, making an
outgoing CO call is impossible (reorder tone is
returned.)
If "No RSTR (No Restriction) is set, calling is
possible regardless of the assignment of "System-
Class of Service", Trunk Group Access.
ARS feature is not applied to a call made by
specifying a trunk group.
Operation
1. Lii the
handset or press the SP-
PHONE button.
2. Dial the feature number for
ARSRocai CO Line Access "9"
(default).
3. Dial the telephone number of the
external party.
l
The system follows the pre-
programmed sequence and
selects the least expensive route.
" The dialed digits are then sent
after ARS adds or deletes digits
according to programming.
If "WIRSTR" (With Restriction) is set , calling is
possible with restriction by "System-Class of
j
Service", Trunk Group Access.
3-c-21
(40993)