Panasonic KX-T336 System Reference Manual page 453

<Example>
Executing once at lo:15 a.m.:
Alarm lo:15 AM
Executing every day at lo:15 a.m.:
r-l
7.
p&
[ Alarm 10:X AM* 1
Replace the handset or press the
SP-PHONE button.
Canceling the alarm time programmed
1. Lift the handset or press the SP-
PHONE button.
rl
s
3.
Dial the feature number for Timed
Reminder Cancel ' #5" (default).
l
You hear confirmation tone 1 or
2 and then dial tone 1 or 3 or 4.
l
If your PITS has a display, it
shows:
Alarm Cancelled
Replace the handset or press the
SP-PHONE button.
Confirming the alarm time programmed (PITS with
display or&)
.-
=*
Lii the handset or press the SP-
PHONE button.
1.
Dial the feature number for Timed
Reminder Confirm "*50" (defauft).
l
The display on your PITS
shows:
When no time is set:
[ Alarm Not Stored 1
It executing every day at 9:00 a.m.
is preset:
<Example>
Alarm 9:00 AM *
3. Replace the handset or press the
SP-PHONE button.
(Supplement)
When a user executes step 2 by a PITS set
without display, reorder tone is heard.
To stop the ringing of alarm tone
When the preset time comes, alarm tone sounds.
If your PITS has a display, it shows:
<Example>
piii%sq
1. Lift the handset or press the SP-
PHONE button.
_ . :
. Alarm tone stops and you hear a
wake-up message or BGM, or
"intermittent tone" (dial tone 2):
2. Replace the handset or press the
SP-PHONE button.
.
This @determined by the system programming.
Refer to Section 3-F-13-00 "Timed Reminder
with OGM (Wake-up Call).'
(Supplement)
In step 1, if you press any button (including dial
keypad) except SP-PHONE without going off-
hook, alarm tone stops and then no tone sounds.
Dial tone 2 in step 1 sounds in the following timing:
-nnn-
+l.osec~
4-l-8
(40993)