Panasonic KX-T336 System Reference Manual page 639

1.05 Unscreened Call Transfer
to
Remote
Description
Allows the attendant to transfer a call (extension,
CO) to the remote maintenance feature.
Modem answer tone is returned instantly, if it is
not in use.
This operation allows the System Administrator
to perform System Administration from a Remote
Location.
Refer to Section 14-B-2.00 "System
Administration from a Remote Location" for
further information.
To transfer a call to Remote Maintenance
Resource, "FDN for Remote" is used, which is
assigned in "System-Operation", Remote
Directory Number.
See Section 3-B-3.00 "Floating Directory Number
(FDN)" for details about FDN.
For accessing the remote maintenance feature,
RMT card must be installed and assigned to the
system.
Programming
~1
Conftguratlon-Slot Assignment ,
Conditions
. . .
If Music on Hold is assigned, the system sends
Music on Hold to the transferred party during the
transferring operation.
For further detail, refer to Section 3-E-l .OO
"Music on Hold."
Operation
During a conversation with an outside party or
extension
1.
Dial the FDN for Remote.
l
Confirmation tone sounds.
The attendant console is free
to handle another call.
l
The following message
appears on the message line in
I/O field:
<Example> If an outside party is transferred:
Message : TRG 01 is connected with
Remote Term.
<Example> If an extension is transferred:
Message : Ext. 100 is connected with
Remote Term.
If Remote Maintenance Resource is in use, busy
tone is returned to the held party. Automatic
Callback does not function in this case, so the
party should call Remote again when it becomes
idle.
6-G-5