Speed Dialing-System - Panasonic KX-T336 System Reference Manual

4.02 Speed Dialing-System
Description
System Speed Dialing allows any extension user
ro call oti:s;de paflies by simply
pressing the
AUTO buttor: and dialirg a pre-assigned 3-digit
code
(001
to 200) common
to any extension user
in the system.
Up to
200 Speed Dialing Codes can be registered
to the system
The Speed Dialing Codes
are registered in
"System-Speed Dialing-System" screen, and toll
restriction level unique to each speed-dialing code
can be assigned In the same screen.
Refer to 7011 Restriction Plan for System Speed
Dialing" on next page for further information.
If Tenant Service is employed, Speed Dialing
Codes can be divided by two tenants. In this
case, one tenant cannot use the Speed Dialing
Codes which belong to the other tenant.
Programming
' i .
System Programming
Reference
VT Dumb
"System-Tenant", Speed 9-D-2.00 1 O-c-5.00
Dialing-System Boundary
' System-Speed Dialing-
9-D-9.00 1
O-C-l 2.00
System"
. ...:)
PITS System Programming Reference
Storing Speed Dialing-System 11-c-3.00
Conditions
Each stored number can have up to 32 digits
including CO line access code. "0 to 9," =*,- Y,,
"PAUSE," "FLASH," Y-n and "SECRET" can be
registered.
When you register a telephone number to a
System Speed Dialing Code, a feature number for
selecting a CO line must be stored as leading
digits.
The
feature numbers for selecting a CO line are:
1
l
ARS/Local CO tine Access
l
Trunk Group 01-08 Access
l
Trunk Group 09-l 6 Access
l
Trunk Group 17-24 Access
Operation
Calling an outside party using Speed Dialing-
System
1. Lift the handset
or press
the
SP-PHONE button.
l
The indicator on the SP-
PHONE button lights in green.
l
You hear dial tone 1 or 3 or 4.
2. Press the AUTO button.
l
The indicator on the AUTO
button lights.
l
You hear no tone.
3. Dial the speed dialing code.
l
The registered number is sent.
I 44 I
(Supplement)
Before pressing the AUTO button in step 2,
dialing a feature number for selecting a CO line
seizes the dialed CO line and starts outpulsing,
ignoring the feature number for selecting a CO
line registered in the speed dialing code.
Instead of the operation in step 1, pressing
Private CO, Single CO or Group CO ignores the
feature number for selecting a CO line stored in
the speed dialing codes and makes a call to an
outside party through the pressed CO line.
While dialing a speed dialing code in step 3,
cancelit@ the code is possible by pressing the
AUTO button. Then repeat steps 2 to 3 for the
new entry.
One Touch Dialing, Speed Dialing, Last Number
Redial, Saved Number Redial and manual dialing
can be used in combination.
<Example>
An extension user can store a number consisting
of 33 digits or more by dividing it and storing it in
two speed dialing codes. In this case, a feature
number for selecting a CO line should not be
stored on the second speed dialing code.
To dial the number, first press the AUTO button
and dial the first speed dialing code, and then
press the
AUTO button and dial the second
speed dialing code.
4-C-l 1